Modular Edge Infrastructure
Data Center, Telecom, Utility

Edge config & pricing wizard >>
Containerized infrastructure site infographic
  • More

    IO Dry Contact

    IO sensor The dry contact input units enable you to hook up legacy equipment like generators, analog systems or other dry contact systems.

    IO Dry Contact Sensor

    Close
  • More

    Temperature & Humidity Monitoring

    Temperature & humdiity sensor The ambient temperature measurement checks if your cooling is still operating and if the room has the desired temperature setting. Combined with the humidity sensors, it ensures that your equipment is running within manufacturers' limits in order to maximize uptime and avoid early failure due to equipment stress.

    Ambient temperature should be between 18-27C / 64-80F.

    Ambient humidity should be between 40% - 60 % rH.

    Temperature & Humidity Sensors

    Close
  • More

    Airflow

    Airflow sensor The airflow sensor monitors the operation of your air ventilation of your BESS.

    Airflow Sensor

    Close
  • More

    Battery Management System

    Battery monitoring system The battery monitoring system monitors the temperature, resistance and voltage of your cells. The string is monitored for its current and impedance.

    Battery Leak Sensor

    Close
  • More

    Water Intrustion

    Water ingress sensor Water is the enemy of electricity. Inside remote offices or IDF rooms, water leak came come from multiple sources. The primary source is a leaking cooling unit. Then you have water leaks from tenants or rooms above your IDF room, street flooding, pipe bursts and many more. The leak sensor by ServersCheck is a 6m water leak sensitive cable so that it can detect water intrusion anywhere in the IDF or office room.

    Water Leak Sensing

    Close
  • More

    Thermal Camera Sensor

    Thermal camera sensor Thermal runaways of equipment will go undetected with traditional temperature sensors as air conditioning units will try to compensate the heat problem. The thermal camera sensor looks at the equipment and monitors its surface temperature in 4800 points, every 2 seconds.

    Overheating equipment will cause stress fan, CPU errors on the device itself and may also affect neighbouring systems. The difference between outtake and intake (room temperature) should not be more than 20C or 35F.

    Infrared Thermal Camera Sensor

    Close
  • More

    Fire Suppression & Detection

    Our partner Viking Integrated Safety offers a complete solution for your BESS to detect and suppress fires.

    With the InfraSensing sensors, Viking can not just detect fires but also prevent them.

    Viking Integrated Safety Logo
    Learn more on Viking

    Close
  • More

    PM Particle Sensor

    Dust sensor The presence of dust accumulates in equipment then at first power usage will increase due to the harder working fans and CPU's running at higher temperatures. Ultimately electronics may fail due to short circuits or corrosion.

    The particle sensor monitors for airborne particles in the air of multiple sizes: PM1, PM2.5, PM4 and PM10.

    Particle Sensor

    Close
  • More

    Power Failure

    AC/DC power failure sensor Power failure is a common reason why edge facilities go offline. Too often the PDU's do not have the built-in alerting capabilities like with LTE or Satellite connectivity. This sensor ensures that you know when there is an AC power failure so that you can take action before it's too late.

    Power Failure Sensors

    Close
  • More

    Power Quality Monitoring

    Power quality sensor The quality of power is one of the main reasons causing equipment to fail, data to be lost or shortening life span of electronics. All impacting business operations. This sensor is able to detect up to 85% of all power quality issues. Plug & Play. No electrical work needed.

    Power Quality Sensors

    Close
  • More

    CO2 & VOC gas sensors

    Gas sensor Li-ion fires are preceded by gas venting of battery cells. Typically this stage gives a few minutes warning before batteries produce smoke and the fire starts. The gas being monitored for Li-ion is CO2.

    Gas sensing

    Close
  • More

    Shock & Vibration Sensor

    Thermal camera sensor The shock sensors on each battery cabinet enable to monitor another root cause of catastrophic battery failures: mechanical abuse.

    By recording vibrations multiple times per second, potential mechanical abuse can be detected. Combined with remote visual monitoring through cameras, the accidental or calculated mechanical abuse can be confirmed.

    Vibration Sensor

    Close
  • More

    Corrosive gas sensors

    Gas sensor Corrosive gasses may be present in the outdoor air. Through ventilation they may get into your facility. H2S & SO2 gasses are known to corrode electrical and electronic equipment resulting in an environmental risk for your facilitiy. NOx & VOC form another danger to your facility.

    Corrosive gas sensing

    Close
  • More

    Refrigerant (R-134a) Leak Detection

    Gas sensor Refrigerants are often used in BESS. Using our R134a gas sensor, leaks can be detected to mitigate the risk from a failing refrigeration and cooling system.

    Gas sensing

    Close
  • More

    Physical & Electronic Security

    Convergint is a global, industry-leading systems integrator that designs, installs, and services electronic security, cybersecurity, fire alarm, and life safety systems.

    As an integrator they can protect your BESS not just against environmental and fire risks but also provide the physical security and access control.

    Convergint Logo
    Learn more on Convergint

    Close
  • More

    Daisy Chain Temperature Sensors

    Temperature & humdiity sensor ASHRAE recommends 6 temperature sensors per rack. Others like Gartner recommend a minimum of 3 temperature sensors per rack: 2 on the intake side (top & bottom) and 1 one at the top back (outtake).

    The daisy chain temperature sensors are designed to solve the limitations of standalone sensors. Each sensor connects onto the next one and thus requiring only 1 sensor port on the base unit (through the DAISY-STARTER)

    Daisy Chain Temperature Sensor

    Close
  • More

    Grouding / Earthing Sensor

    Electrical grounding sensor This sensors checks non stop the grounding's resistance. This allows you to get early warning on your grounding system.

    The sensor detects following:
    - accidental disconnected grounding systems
    - corrosion of copper ground bars due to environmental conditions
    - copper ground theft


    Earthing / Grounding Sensor

    Close