IP68 Ultrasonic Fuel Level Sensor
- Plug & Play
- Contactless (ultrasonic) fuel level measurement
- Measures fuel level inside tanks with depths of up to 2m (6.5ft)
- with wall thickness of up to 6mm.
- IP68 rates for outdoor use
- Calibrated in factory based on specs of your tank
- In operating temperatures of 4°C to 65°C (39F to 148F)
- ISO 884 6ignition protected
- Fire Resistance tested to ABYC, US Coast guard and ISO 10088
Combined with the base unit it is a stand-alon solution to monitor the fuel levels in your tanks.
- Contactless (ultrasonic) fuel level measurement
- Measures fuel level inside tanks with depths of up to 2m (6.5ft)
- with wall thickness of up to 6mm.
- IP68 rates for outdoor use
- Calibrated in factory based on specs of your tank
- In operating temperatures of 4°C to 65°C (39F to 148F)
- ISO 884 6ignition protected
- Fire Resistance tested to ABYC, US Coast guard and ISO 10088
Combined with the base unit it is a stand-alon solution to monitor the fuel levels in your tanks.
Top mount on tanks
Industry standard SAE-5 stud mounting pattern with gasket seal and washers.
No PC or Software Required
The ServersCheck sensors connect to the base unit (BASE-WIRED). The base unit is a standalone device that has its own IP address in your network. On its own it will monitor the sensor and trigger alerts via email, SNMP or optional SMS when needed.
There is no software or PC required for the sensors to run.
With our optional Monitoring Software you can centrally monitor sensors with trending and more. This is optional and not required.