Industrial Infrared Spot Sensorcontactless temperature monitoring
contactless temperature monitoring
Some of ServersCheck's customers:
key sensor features
Industrial digital SNMP & Modbus TCP sensor designed for contactless temperature monitoring inside enclosures. Daisy chain up to 8 IR spot temperature sensors.
- single zone contactless temperature sensor- reports average temperature from objects within its FoV
- measures object temperatures from -70°C to +380°C
- resolution: 0.02°C
- with a ±0.5% accuracy from 0°C-50°.
- wide angle of view of 90°C.
- daisy chain version available for up to 20 sensors.
- compact plug & play sensor.
- designed for indoor use.
- steel enclosure.
- industrial grade.
- 0u rack, DIN rail or wall mountable sensor.
- plugs into the base unit.
- powered by the base unit.
- alerts via SNMP Traps, email or SMS.
- integrates via Modbus TCP, SNMP, JSON with other systems.
Contactless bus bars monitoring
Mounted on the inside of your power panels, the contactless IR spot sensor monitors the temperature of your power control cabinets (such as Automatic Transfer Switches). Instead of doing periodic thermal IR auditing of your power infrastructure, monitor it 24x7 with this sensor.
Daisy Chain Option Available
Need to connect multiple IR spot sensors? A base unit supports up to 8 sensors to be connected with the optional Sensor Hub. If you need more than 8, then our daisy chain version of the sensor allows you to connect up to 20 IR spot sensors to one base unit.
more info on daisy chained sensors
more info on daisy chained sensors
Field Of View Calculator
The calculator below enables you to get an estimate of the area captured by the daisy chained IR sensor based on its distance from the objects. Change the values in the form below to generate a new FoV diagram.
Distance from sensor to monitored equipment(s)
Inches
Cm
No PC or Software Required
The ServersCheck sensors connect to the base unit (BASE-WIRED). The base unit is a standalone device that has its own IP address in your network. On its own it will monitor the sensor and trigger alerts via email, SNMP or optional SMS when needed.
There is no software or PC required for the sensors to run.
With our optional Monitoring Software you can centrally monitor sensors with trending and more. This is optional and not required.
How It works.
The ENV-IRSPOT sensor connects to the the base unit. This makes the device an ethernet Infrared Spot sensor. The sensor measures the relative humidity and temperature. This sensor is designed to monitor conditions in server rooms and other sensitive area's. Humidity reading is done through the external probe. Alerting via email, SMS, voice call. Integrates with BMS platforms using the Modbus TCP protocol. Or with NMS systems through SNMP GET and SNMP TRAPS.
Technical Specifications
| Technical Specifications. - IR Spot Temperature Sensor Probe | |
| Temperature object measurement range: -70°C to +380°C (-94°F to +716°F) in PoE mode | |
| Temperature Accuracy: +/- 1°C from 0°C to +65°C / 32°F to 149°F | |
| Field Of View (FOV): 90° | |
| Distance: Can detect IR heat from up to approximately 30m/90ft | |
| Readings in Celsius or Fahrenheit | |
| Certified Operating temperature range: -40°C to +125°C (-40°F to +257°F) in PoE mode | |
| Operating humidity range: < 90% rH (non-condensating) | |
| Dimensions: 74 mm (2.9") x 66 mm (2.59") x 22 mm (0.8") | |
| Housing: Orange metal case with status led | |
| 0U Rack mountable or Wall mountable | |
| The SensorGateway is required for this sensor. Requires SensorGateway v5.1+ with firmware 8+ | |
| Network communication protocols: SNMPv2,v3 XML, JSON, HTTP and Modbus TCP | |
|
Operating temperature range: 0ºC to +75ºC (32ºF to +167ºF) Operating humidity range: < 90% rH (non-condensating). | |
| Sensor connects via regular straight RJ45 cable to the SensorGateway. Maxmimum distance between probe and SensorGateway is 100m/330ft when using a CAT6 or CAT7 cable (subject to cable quality and interference) |
|
